Equipment rarely fails without warning. A furnace that takes two or three attempts to light, an AC that runs longer than it used to before the house cools down, a thermostat that keeps drifting from the setpoint: those are the early signs that something is working harder than it should. Catching them before the system quits entirely is almost always cheaper than calling after it does. That is the call worth making.
We handle heating and cooling for homes and rental properties across Lebanon and Boone County. Whether the situation is a repair that needs a diagnosis, a system that has reached the end of its useful life, or equipment that has never been right for the space it is supposed to condition, we scope it on the phone and get someone out to look at it.
Call (463) 262-2951 to get started.
A home that heats and cools right is a comfortable home, and getting there starts with knowing what the job actually involves before any number is put on it. When you call, we ask about the equipment, the symptoms, and the property. That conversation is how the scope gets set, and the price follows from the scope.
What moves a quote is straightforward. A repair that only needs a sensor or a capacitor costs less than one where a heat exchanger has cracked or a compressor has failed. A system replacement in a house where the ductwork is already in good condition is a different job from one where the duct system needs work at the same time. Whether the equipment is accessible or buried behind finished walls makes a difference. We work through that with you on the call.
No figures are invented on the phone before the system has been looked at. The price is confirmed before anything is scheduled, and if the diagnosis on site turns up something different from what the call suggested, the updated scope is explained and agreed before any additional work begins. You get a straight answer about what the visit covers and what it costs.
No matter what's going wrong with your heating or cooling, the first step is the same: call and describe what the system is doing. We take emergency calls for furnaces, air conditioners, heat pumps, and boilers every day from 9:00 AM to 8:30 PM. A system that is completely down gets treated as a priority, and availability is confirmed when you call.
For rental properties, the coordination matters as much as the repair. When a tenant is in the unit, access needs to be arranged, and whoever pays the bill needs to know what was found and what was done. We handle that on the call: confirm who needs to be reached, what access looks like, and where the invoice goes. A property owner does not need to be standing in the unit for the visit to go smoothly.
For commercial spaces that have to stay open, the approach is the same. We discuss the timing and the access constraints before the visit so the work fits around the business rather than stopping it.
Getting your comfort problem handled starts with a quick call. But some spaces do not have ductwork and are not practical candidates for it. That is where a ductless mini-split system earns its place.
A mini-split handles both heating and cooling from a single unit. The indoor head mounts on a wall or ceiling, the outdoor unit sits outside, and the two connect through a small penetration in the wall. No duct runs, no major demolition, no months of construction. For an addition that was never connected to the main system, a finished basement, a detached garage used as a workspace, or a sunroom that bakes in summer and freezes in winter, a mini-split is often the most direct answer.
The same technology applies at larger scale. Multi-zone ductless systems let different areas of a building run at different temperatures independently, which is useful in commercial spaces where one side of the building gets sun all afternoon and the other does not. We handle installation, service, and repair for ductless and mini-split systems across Lebanon and the surrounding area.
When one room in a house is always too warm and another is always too cool, the issue is usually airflow distribution rather than the equipment itself. Registers that were never adjusted after a renovation, a duct branch that is undersized for the room it serves, or a return air path that is blocked all produce the same result: the system runs fine but the house does not feel right. Rebalancing the system means checking airflow at each register, adjusting dampers where they exist, and identifying where the duct layout is working against the equipment.
A house that has been heated with a furnace for years but has no cooling system is a common situation in this part of Indiana. Adding central air means matching an air conditioning unit to the existing air handler and duct system, or sizing a new air handler if the furnace does not have one. The ductwork condition matters: a system that leaks conditioned air into the attic or crawl space before it reaches the living area will underperform regardless of the equipment installed. We assess the duct system as part of the installation scope.
A heat pump handles both heating and cooling from a single piece of equipment. In the regional climate this area shares, a heat pump paired with a gas furnace as a backup covers the full temperature range without giving anything up on the coldest days. Installation involves equipment selection, refrigerant line routing, air handler compatibility, and thermostat pairing. When an existing heat pump is failing, whether it is not heating, not cooling, or freezing up on the outdoor coil, the diagnostic process starts the same way as any HVAC call: find the fault, explain it, and confirm the options before any work begins.
Water collecting around the base of an air handler or furnace is not a plumbing problem. It points to a blocked or disconnected condensate drain line, a cracked drain pan, or a frozen evaporator coil that has thawed and overflowed. Left alone, it damages the equipment and the floor around it. A service call identifies which of those is the cause and addresses it directly.
A rooftop unit that has not been serviced in a season is a liability when summer peaks. Commercial rooftop systems accumulate dirt on the coils, develop refrigerant leaks, and wear through belts and bearings without showing obvious symptoms until output drops noticeably. We service and repair rooftop units for small commercial buildings in Lebanon, and the call works the same way as any other: describe the equipment, describe the symptom, and we confirm the scope before anyone is scheduled.
The honest answer is that repair is almost always worth doing when the equipment is relatively young and the fault is a single component. A failed igniter, a worn contactor, a refrigerant leak that can be traced and sealed: those are repairs that extend the life of a system without spending money on equipment that still has years left in it.
Replacement becomes the better answer when the repair cost approaches a significant fraction of what a new system would cost, when the equipment has failed repeatedly in a short period, or when the system is old enough that a repair now is likely to be followed by another one before long. An oversized or undersized system that has never been right for the house is a separate case: replacing it with equipment that is correctly sized often solves comfort problems that repairs never could.
We tell you if a permit is needed. We size the system to the home. We explain the options. The decision is yours, and we give you the information to make it.
Landlords and property managers in Lebanon call us for the same work homeowners do, but the coordination is different. The tenant needs to know someone is coming. Access has to be arranged. The property owner or manager is the one who authorizes the work and receives the invoice, even if they are not on site.
We handle that on the call. When you contact us about a rental unit, we confirm who the point of contact is for access, whether the tenant has been notified, and where the invoice should go. Seasonal maintenance on rental properties is worth scheduling before the heating or cooling season starts, because a system that fails in a tenant's unit in January or July is an emergency that could have been a routine visit in October or April.
We cover Lebanon and the communities around it, including Ulen, Whitestown, Elizaville, Zionsville, and Advance. Boone County is our territory, and calls from anywhere in it are handled the same way: scope the job on the phone, confirm the price before scheduling, and get the work done.
The work gets explained while it is happening. That applies whether the job is a repair on a single furnace, a full system replacement, or a seasonal tune-up before the weather turns. If you are working out what the job needs, the full list of HVAC services goes through it.
Not always. Compatibility depends on the wiring at the thermostat base and the communication protocols the equipment uses. Some older systems and some heat pumps require specific thermostat models. We confirm compatibility when you call to book a thermostat installation.
Yes. Zionsville, Whitestown, Ulen, Elizaville, Advance, and the surrounding Boone County area are all part of our service territory. The scope, the pricing process, and the way the visit works are the same regardless of which community you are calling from.
Call (463) 262-2951 and we will confirm availability for your address.
Regional summers bring enough humidity that a standard air conditioner handles only part of the problem. An AC removes moisture as a byproduct of cooling, but it cannot keep pace when outdoor humidity is high and the house is being used normally. A whole-home dehumidifier integrates with the existing air handler and pulls moisture out of the air on its own cycle, independent of whether the AC is actively cooling. The result is a house that feels more comfortable at the same thermostat setting, and indoor humidity that stays in a range that does not promote mold growth or damage wood surfaces over time.
In most cases, yes. A full system replacement typically takes a day or less for a standard residential installation, and the disruption to the occupant is limited to the hours the work is active. We confirm the scope and the timeline on the call so both the manager and the tenant know what to expect.
Older homes in the area frequently have ductwork that was sized for equipment no longer in the house, return air paths that were never properly designed, and systems that have been repaired repeatedly without anyone addressing the underlying airflow problem. The result is usually uneven temperatures, higher energy use than the square footage warrants, and equipment that runs longer than it should to reach setpoint. A proper diagnosis covers the full system, not just the component that triggered the call.
Yes. A system that appears to be running fine in mild weather can have faults that only show up under peak load. A pre-season check catches those before the first hot or cold stretch of the season, when demand for service is highest and a breakdown is most disruptive.
Ask about equipment removal when you call to book the replacement. We confirm what is included in the scope of the installation, including whether the old unit is removed from the property, before anything is scheduled.
For most repair and maintenance work, yes, the system needs to be off while the technician is working on it. The system is run back up and tested at the end of the visit to confirm everything is operating correctly before the technician leaves.
Describe what the system is doing and we take it from there. We'll find the fault and set it right.
Call (463) 262-2951 and we will ask a few questions about the property, confirm what the visit covers, and get it on the schedule.
We are available every day from 9:00 AM to 8:30 PM.
Everywhere else we go is in our list of areas. Close by, we also take heating and cooling work in: Whitestown, Zionsville, Pittsboro, Brownsburg.
Every heating and cooling job we handle starts the same way: a clear diagnosis, a straight explanation of what the system needs, and a price confirmed before anything is scheduled. The table below covers the full range of work we do for homes and businesses across Lebanon and Boone County. Use it to find the service that fits your situation, then call and we will walk through the details with you.
| Service | What the Service Includes | When You Need It | Things to Know |
|---|---|---|---|
| Heating & Furnace Repair |
| Any home or rental property where the furnace is not turning on, blowing cold air, or shutting off before reaching temperature | A furnace that short cycles or trips its limit switch repeatedly usually points to an airflow or heat exchanger issue worth diagnosing before winter sets in |
| AC Repair & Service |
| Homes or businesses with an AC that has stopped cooling, is freezing up, or is short cycling | Scheduling before the first hot stretch of summer means the repair happens on your timeline, not during peak demand |
| Full System Installation & ReplacementMost Popular |
| Homes or commercial buildings where the existing system is aging, failing repeatedly, or no longer keeping up with the space | A system that is too large for the home short cycles and leaves the air feeling clammy, so correct sizing to the load matters as much as the equipment brand |
Call (463) 262-2951 to talk through your heating or cooling situation and get a quote before anything is scheduled.
(463) 262-2951